DFI KB160 - Manual (Page 14)

www.dfi .com
14
Chapter 2 Hardware Installation
Chapter 2
Backlight Power Select Panel Power Select
1-2 On: +12V
3-4 On:+5V
5-6 On: +3.3V
(default)
2-3 On: +5V
1-2 On: +3.3V (default)
JP8 is used to select the power supplied with the LCD panel.
Important:
Before powering-on the system, make sure that the power settings of JP8 match the
LCD panel’s specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
JP7 is used to select the power level of backlight control: +3.3V (default) or +5V.
Important:
Before powering-on the system, make sure that the power settings of JP7 match the
power specification of backlight control. Selecting the incorrect voltage will seriously
damage the backlight.
6 4 2
5 3 1
JP8
6 4 2
5 3 1
6 4 2
5 3 1
JP7
3
1
2
3
1
2