Features, Chapter 1 – DFI BT100 User Manual
Page 7

7
Chapter 1
Features
• Watchdog
Timer
The Watchdog Timer function allows your application to regularly “clear” the system at the set
time interval. If the system hangs or fails to function, it will reset at the set time interval so
that your system will continue to operate.
• DDR3L
DDR3L is a higher performance DDR3 SDRAM interface providing less voltage and higher
speed successor. DDR3L SDRAM modules support 1066/1333MHz for DDR modules. DDR3L de-
livers increased system bandwidth and improved performance to provide its higher bandwidth
and its increase in performance at a lower power.
• Graphics
The integrated Intel
®
HD graphics engine delivers an excellent blend of graphics performance
and features to meet business needs. It provides excellent video and 3D graphics with out-
standing graphics responsiveness. These enhancements deliver the performance and compat-
ibility needed for today’s and tomorrow’s business applications. Supports DVI-D, VGA and LVDS
interfaces for 3 display outputs.
• PCI
Express
PCI Express is a high bandwidth I/O infrastructure that possesses the ability to scale speeds
by forming multiple lanes. The PCI Express architecture also supports high performance graph-
ics infrastructure by enhancing the capability of a PCIe x4.
• Serial
ATA
Serial ATA is a storage interface that is compliant with SATA 1.0a specification. With speed of
up to 3Gb/s (SATA 2.0), it improves hard drive performance faster than the standard parallel
ATA whose data transfer rate is 100MB/s.
Gigabit LAN
Two Intel
®
I210AT Gigabit LAN controllers support up to 1Gbps data transmission.
• Audio
The Realtek ALC888 audio codec provides 5.1-channel High Definition audio output.
Chapter 1 Introduction
www.dfi .com
Temperature
• Operating
: 0
o
C to 60
o
C - Atom, Celeron (Fanless)
: -20
o
C to 70
o
C - Atom (Fanless with air fl ow)
: -40
o
C to 85
o
C - Atom (Fanless with air fl ow)
• Storage: -40
o
C to 85
o
C
Humidity
• 5% to 90%
Dimensions
• Mini-ITX form factor
• 170mm (6.7") x 170mm (6.7")
Note:
*Optional and is not supported in standard model. Please contact your sales represen-
tative for more information.