DFI BT100 - Manual (Page 14)

www.dfi .com
14
Chapter 2 Hardware Installation
Chapter 2
LCD/Inverter Power Select
2-3 On: +5V (default) 1-2 On: +12V
1 3 2 1 3 2
JP14 is used to select the power level of the LCD/inverter power connector.
JP14
Panel Power Select
1-2 On: +12V 3-4 On:+5V 5-6 On: +3.3V (default)
1
6
4
2
5
3
JP15 is used to select the power supplied with the LCD panel.
Important:
Before powering-on the system, make sure that the power settings of JP15 match
the LCD panel’s specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
JP15
1
6
4
2
5
3
1
6
4
2
5
3