Devolo MicroLink ADSL Modem Router - Manual (Page 28)

Router configuration
|
| devolo MicroLink ADSL Modem Router |
28
EN
Reset to Factory Default
To reset the router to its factory defaults, select 'Reset to Factory Default' and
confirm your choice with the Reset button, or press and hold the 'Factory
Default' button on the rear panel of the MicroLink ADSL Modem Router
briefly. This will restart the MicroLink ADSL Modem Router. Next, restart
all of the connected computers.
The reset will discard your current settings, making it necessary to reconfi-
gure the router.
Firmware Update
Once you have downloaded the new firmware from the Internet, open the
menu of the MicroLink ADSL Modem Router, select 'Tools' and 'Firmware
Update', and click Prepare update. The MicroLink ADSL Modem Router
will now start in a special mode. Select Browse to locate the new firmware.