Devolo MicroLink ADSL Modem Router - Manual (Page 17)

|
Router configuration 17
| devolo MicroLink ADSL Modem Router |
EN
Save Settings
Here you can save all of the settings you have changed.
Keep in mind that the settings you have configured only take effect if you con-
firm them under 'Save Settings' by clicking Save.
3.3.4 Setup
Admin Password
Specify the password here.
Select a new password to prevent unauthorized access to the configuration
of your router. Enter it into both fields. You also enter your old password.
The password must be at least 8 characters long. Should you ever forget your
password, you will need to press the 'Factory Default' button. However, this
will also delete all of your configuration data. You will then need to set up the
router again. The factory-default administrator password is 'password'. Save
your new password by clicking Submit.
Keep in mind that the settings you have configured only take effect if you con-
firm them under 'Save Settings' by clicking Save.
Please note that changing the administrator password will disable the setup
wizard. To use the setup wizard, restore the password to its default setting,
'password'.