6 load settings, 7 save settings, 5 recordings – Devolo dLAN TV SAT Starter Set User Manual
Page 61: Load settings, Save settings, Recordings
60 TV and radio programme
devolo dLAN TV SAT Starter Set
If the IP address is not known or if no specific address
will be used, select the Dynamic option. In this case,
the IP address and the other data will be sourced au-
tomatically from a DHCP server.
When the device is supplied, the dynamic IP
address is set.
Use the GREEN button to test the Internet velocity.
5.4.6 Load settings
This function allows you to reset the
dLAN TV SAT to IP Receiver to its previously stored set-
tings. All current settings are lost when the device is re-
set.
5.4.7 Save settings
This function allows you to save your own settings to
the dLAN TV SAT to IP Receiver. When you confirm
with OK, all previous entries are overwritten.
5.5 Recordings
A USB drive must be connected to the
dLAN TV SAT to IP Receiver before the
recordings library can appear.
Select Recordings in the menu and confirm with OK.
The available recordings are displayed and managed
using the menu at the bottom of the screen: