Devolo dLAN TV SAT Starter Set - Manual (Page 20)

Initial use 19
devolo dLAN TV SAT Starter Set
Operating status display
b
Lights up green when the
dLAN TV SAT to IP Receiver is operational.
b Lights up red when the
dLAN TV SAT to IP Receiver is in stand-by mode or
switched off.
The dLAN TV SAT to IP Receiver complies with current
EU power-consumer directives and includes a stand-by
mode for lower power consumption (power-saving
mode). A few seconds after you switch off the
dLAN TV SAT to IP Receiver, the device changes to
PowerSave mode by default and the display goes
blank.
If power-saving mode is disabled, the time is shown on
the display when the dLAN TV SAT to IP Receiver is
switched off.
Once the device is in power-saving mode, it takes a few
seconds to restart.
If you go in the menu to Settings ı Con-
figuration ı PowerSave mode ı , you can
disable the standby mode with low
power consumption. To save on energy
costs, we recommend leaving power-
saving mode active.
Fig. 6