Devolo dLAN TV SAT Starter Set - Manual (Page 25)

24 Initial use
devolo dLAN TV SAT Starter Set
3.6 dLAN TV SAT Multituner
3.6.1 Setup instructions
Positioning on level surface
If you place the dLAN TV SAT Multituner on a level
surface, select a stable base.
Wall mounting
Make sure that no gas, water or power
lines in the wall get damaged. There is
a danger of electric shock!
Use suitable fasteners for the respective base to en-
sure a reliable and secure wall mounting.
3.6.2 Connecting the
dLAN TV SAT Multituner
ቢ Use one or two coaxial cables with an F-connector
to connect the satellite system to the antenna
input of the dLAN TV SAT Multituner.
ባ Plug the Euro 8 cable into the power jack of the
dLAN TV SAT Multituner and the power plug into
an available power outlet. Thanks to the inte-
grated dLAN adapter, the
dLAN TV SAT Multituner is connected directly to
the dLAN network (see also 3.8 Connecting the
dLAN TV SAT to IP Receiver to the dLAN and
the mains supply). To secure your dLAN net-
work, continue with your network configuration.
For more information, refer to the chapter 7
dLAN network.
3.7 Connect the
dLAN TV SAT to IP Receiver to
the TV set.
3.7.1 Connection via HDMI
Use the HDMI cable supplied to connect the
dLAN TV SAT to IP Receiver to an HD TV set. Digital im-
age and sound will be transferred simultaneously via
the HDMI cable. The dLAN TV SAT to IP Receiver also
supports HD-ready (1440 x 720) and full HD (1920 x
1080) video resolution.
3.7.2 Connection via SCART
Use a SCART cable to connect the
dLAN TV SAT to IP Receiver to an analog TV set.
Analog image and sound will be transferred simulta-
neously by the SCART cable.