Devolo dLAN TV SAT Starter Set - Manual (Page 55)

54 TV and radio programme
devolo dLAN TV SAT Starter Set
Channel List Update
If you have selected the Channel List Update during
the First Time installation, you can update the chan-
nel list using this setting.
Manual channel scan
This is where you manually enter all the details of the
desired channel.
b You select the satellite name from the selection list
in the Satellite field.
b You enter the frequency in the Frequency field
using number keys 0 to 9.
b You select the polarisation from the selection list
in the Polarisation field.
b You enter the symbol rate in the Symbol rate field
using number keys 0 to 9.
b You select the network number from the selection
list in the Network search field.
b Channel scanning:
ć Yes: after one transponder has been set, the
parameters of other transponders are
retrieved from the NIT table (Network Infor-
mation Table) and the other transponders set.
Once the transponder frequency has been en-
tered, the signal level and quality are dis-
played on the bars at the bottom of the
screen. The Signal quality bar shows the re-
ception quality. The Signal level bar shows
the strength of the satellite signal.
You confirm all entries with OK.