Devolo dLAN 500 WiFi - Manual (Page 24)

Initial use 23
devolo dLAN 500 WiFi
4.3 Functions
The dLAN 500 WiFi has one Wi-Fi and one dLAN but-
ton with LED status display, a network jack and a reset
button.
The LED status display can be deacti-
vated on the configuration interface
of the dLAN 500 WiFi (see 6.4.5 LED
settings).
4.3.1 Wi-Fi button
The Wi-Fi button controls the following Wi-Fi
functions:
b Wi-Fi On/Off:
ć In the factory default settings, Wi-Fi is
already enabled and Wi-Fi WPA2 encryption
is configured. The default Wi-Fi key for the ini-
tial installation of the dLAN 500 WiFi is the
adapter's Wi-Fi key.
Before the networking procedure,
take note of the Wi-Fi key of the
dLAN 500 WiFi from which all Wi-Fi
configurations are to be transferred
to all other dLAN 500 WiFi adapters.
You will find the unique key on the
label on the back of the housing.
ć In order to switch Wi-Fi off, press and hold
the Wi-Fi button longer than 3 seconds.
Fig. 4