Plc radio gp8 option, Checking your program, Programming the other zones – Delta Dore 620 RADIO DRIVER User Manual
Page 10: Exiting the programming mode, Programming
- 19 -
PLC RADIO GP8 option
The PLC RADIO GP
8
option is an energy manager for
new or existing housing.
Associated with the RADIO DRIVER, it lets you:
- control the heating through receivers by using line
carrier transmission (no modification of the electric
installation),
- provide load-shedding for up to
8
channels (single or
three-phase),
- display the total consumption (if associated with
an electronic meter). Possibility of also measuring
consumption per appliance (heating, DHW, other)
by adding additional CTs (ref. 6330004),
- associate home automation products (door/window
magnetic contact, alarm control unit, telephone
transmitter, etc.),
- display the outside temperature (with wireless outdoor
probe ref. 6300036).
- 18 -
Checking your program
Press the
button repeatedly to check the accuracy of
the Comfort and Economy periods you created.
Press the OK button to check the next day.
Programming the other zones
The programming for the other zones is available after
pressing (
OK
) of the day 7 of the current zone.
Exiting the programming mode
Turn the knob to another mode.
Progr
a
m
Profile
Verific
a
tion
of the different
or period
s
Time
s
lot
con
su
lted
COMMENTS: Depending on the configuration made
during installation, programming can be weekly or daily.
Likewise, this programming may be done in increments
of one hour, 30 minutes, or 15 minutes. To change these
settings, refer to the “installation guide”, or contact our
customer service department or your installer.
Programming