Dataprobe T-APS Standalone - Manual (Page 11)

V130201E T-APS Users Manual Page 11
O: SET TRAP IP ADDRESS
Assign T-APS SNMP TRAP alarm IP Address.
Selections [ #1TRAP #2TRAP ]
#1TRAP Default: 192.168.000.069
#2TRAP Default: 000.000.000.000
P: SET COMMUNITY STRING
Assign T-APS SNMP Community String (Password)
Selections [ GET SET TRAP ]
GET Default: Public
SET Default: Private
TRAP Default: Public
Q: SET CURRENT DATE
MM/DD/YY: Month / Day / Year
R: SET CURRENT TIME
HH/MM/SS: Hour / Minute / Second
S: SET PASSWORD
Default Password – PASS
T: USE FACTORY DEFAULTS
Selections [ YES NO ]
U: SHOW CURRENT LINE
Displays either Line 1 or Line 2 current selected by T-APS.
V: SHOW MAC ADDRESS
Displays the programmed MAC address of the unit.
W: EXIT
Exit T-APS setup configuration.
T-APS requires a PC using the RS-232 CONSOL PORT to change password.
Selections [ YES NO ]
Selecting YES will logout T-APS setup, and it will require a password to enter.
Selecting LOGOUT NO will exit this function.