Daktronics GameDay Baseball - Manual (Page 18)

12 Operation
Setup on DakStats Computer
1. Open GameDay Baseball and click Configure.
2. On the Communication tab, select Manual Download, and then click OK.
3. The default location under Select the folder location for the files is “C:\Daktronics
GameDay\Baseball”. This folder is where the downloaded files must be placed.
If applicable, this location may be set to read from the same location on a USB flash
drive where the files have been downloaded. Be sure that both computers use the
same drive letter for the USB flash memory drive.
Manual Download Procedure
1. On the Internet computer, open GameDay Baseball, and the software will download
the information about today’s game from the Internet.
Note: The Errors column of the main application screen will lock out any columns
pertaining to file conversion and game creation (Figure 11).
2. Click the Start button to download the various data files. If any download fails,
try again.
3. Once the downloads are complete, Copy all the files from the download directory to
a USB flash memory drive (Figure 12).
4. On the computer with DakStats Baseball, Paste all the copied files into the download
directory (“C:\Daktronics GameDay\Baseball” is the default).
Figure 11: File Conversions Locked
Figure 12: Copy Downloaded Files