Daktronics DakStats Baseball Software - Manual (Page 18)

14 Quick Display & Stats Interface Pages
Note: Items with the %Select are not compatible with quick display buttons.
These require a stats display page in Venus 7000 (see Section 5.2).
e. Click OK to save the changes to the quick display button.
4. Repeat Step 4 to assign more commands to the cells. While the Quick Display window
has 45 cells, only 20 buttons may be assigned to the Quick Display toolbar at one time.
Note: To delete an existing cell, right-click the cell, and click Delete Item. Buttons may
also be Cut, Copied, and Pasted through the right-click menu.
5. Click Close when finished creating the quick display buttons.
6. Go to View > Quick Display Toolbar to make the Quick Display Toolbar appear above
the standard toolbar (Figure 20).
Note: The QD Display toolbar can be undocked and moved, and it also will dock on
either side or the bottom of the screen.
7. Open the Venus 7000 Display Monitor and click the Quick Display buttons to make sure
the correct requested data is being displayed on the correct sequence.
5.2 Stats Interface Pages
In order to request specific player stats or messages using the %Select parameter, users must
create a stats interface page in Venus 7000 with buttons for the requests.
Below is a quick explanation of the process. For more information on setting up stat interface
pages, refer to the Venus 7000 Controller Operator’s Manual (ED-14551).
1. Open the Venus 7000 Shell
and click Display.
2. In the V7Dsply window, go
to View > Configure Pages.
3. In the Display Page
Configuration window
(Figure 21), select an
available page (1-10), and
then click Add New Page.
Figure 20: Quick Display Toolbar
Figure 21: Display Page Configuration