Daktronics AF-3080-68-R,A - Manual (Page 56)

Sign is stuck on bright or dim. • Check Manual/Auto dimming in
Venus 1500 software.
• Check light detector cable.
• Check light detector for
obstructions.
• Replace the light detector.
• Replace the controller.
4.13 Initial Operation Information
Every time the display is operated, the display will run through an initialization in
which it will display the following:
1. Output Test (DDDs)
2. Product Name (Galaxy)
3. Display Size (Row x Column)
4. Firmware Number (ED-10134)
5. Firmware Revision (Rev X.XX)
6. COM1 Configuration (C1: V15/RTD)
7. COM2 Configuration (C2: None)
8. Line Frequency (60 Hz)
9. Hardware Address (HW: XX)
10. Software Address (SW: XX)
11. Display Name
12. Modem (If modem is present)
Maintenance and Troubleshooting 4-14