Daktronics DF-1050/1051/1052/1053 - Manual (Page 43)

Parking Garage Display Operation 5-7
LCD Screen Action
DIMMING
1) AUTOMATIC
↓
Press the down arrow key < ↓ > to toggle
through dimming settings:
Automatic – The display automatically dims
based on the light detected at the display
Manual – The display dimming level is set
manually. Once set, this value remains in
effect, regardless of the level of light detected
at the display.
Blank Sign – Will blank the display of all
items
If AUTOMATIC Dimming is selected, the following LCD prompt will be shown:
LCD Screen Action
SET AUTO DIMMING
MAX INTENSITY? Press the < ENTER/EDIT > key to edit the
maximum intensity for auto dimming.
This is the maximum intensity that the
display will use in full-bright modes
(during daylight hours.)
Press <
CLEAR > to keep the current auto
dimming maximum setting
The following LCD prompt is shown for either Manual or Automatic Dimming
selections:
LCD Screen Action
INTENSITY XX
↓↑
ENTER TO SET
XX – Current intensity (1-16)
Max Intensity – 16 (Default is 16)
Press the up or down arrow keys < ↑↓ > to
modify the current intensity of the display
Press <
ENTER > to accept this intensity. If
the Manual Dimming mode is selected, this
will be the new intensity for the display. If
the Automatic Dimming mode is selected,
the display will illuminate in full-bright
mode, which is the maximum intensity
level.
A third option controlled by the <
DIMMING > key is the Blank Sign command, which
clears the display completely.