beautypg.com

Product identification, Optional remote control accessories, Local codes – Desa FDCFRN User Manual

Page 5: Product features, Unpacking

background image

www.desatech.com

111244-01C

5

PRODUCT

IDENTIFICATION

Ignitor Button

Screen

Fireplace
Cabinet

Log

Control Knob

Figure 1 - Vent-Free Compact Dual Flame

Fireplace

O
F

F

P

IL

OT

O

N

H

I

L

O

Hood

Fireplace
Cabinet

Logs

Ignitor
Button

Remote Control
(Optional)

Control Knob

Hood

OPTIONAL REMOTE

CONTROL ACCESSORIES

(For Remote-Ready Models Only)

There are four optional remote controls that can
be purchased separately for Remote-Ready Mod-
els only:

• wall switch

• hand-held ON/OFF remote

• wall thermostat • hand-held thermostat remote

See Accessories, pages 40 and 41.

LOCAL CODES

Install and use fireplace with care. Follow all lo-
cal codes. In the absence of local codes, use the
latest edition of The National Fuel Gas Code ANSI
Z223.1/NFPA 54
*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

PRODUCT FEATURES

SAFETY PILOT

This fireplace has a pilot with an Oxygen Deple-
tion Sensing (ODS) safety shutoff system. The
ODS/pilot is a required feature for vent-free room
fireplaces. The ODS/pilot shuts off the fireplace
if there is not enough fresh air.

PIEZO IGNITION SYSTEM

This fireplace has a piezo ignitor. This system re-
quires no matches, batteries, or other sources to
light fireplace.

THERMOSTATIC HEAT CONTROL
FOR THERMOSTAT-CONTROLLED
MODELS

Thermostat-Controlled models have a thermostat
sensing bulb and a control valve. The thermostat
will automatically modulate the heat output to
maintain a consistent room temperature. This re-
sults in greater fireplace comfort. This can also
result in lower gas bills.

UNPACKING

1.

Remove fireplace and hood from carton. Log
is wrapped and inside fireplace. Do not re-
move at this time.

2.

Remove all protective packaging applied to
fireplace for shipment.

3.

Make sure your fireplace includes one hard-
ware packet.

4.

Check fireplace for any shipping damage. If
fireplace is damaged, promptly inform dealer
where you bought fireplace.

This manual is related to the following products: