CREATOR SPRO-CON9000 - Manual (Page 10)

CREATOR Corporation China 2010-05 WWW.CREATOR1997.COM
4 User’s Manual for SPRO Network Control Host Series
transmission indicator
Supports 3/4/8-way COM port signal
indication (subject to specific model), when data
is
being exchanged through COM port,
corresponding indicator will be on. TX is signal
transmission indicator, RX is signal receive
indicator.
3） IR OUT—— Infrared signal indicator
Supports 4/8-way infrared signal indication
(subject to specific model), when the host is
transmitting infrared signal to the device in control,
corresponding indicator will be on.
4） RELAY OUT——Relay power on/off
status indicator
Support 4/8-way light-current relay power on/off
indication (subject to specific model), when the
light-current relay is with current, corresponding
indicator will be on, otherwise it will be off
(flashing when triggered by pulse signal, constant
lighting when triggered by high-level signal.)
Here the light-current relay concerned refers to
the host postpositional low-voltage relay only.
Indicator is not for indicating the power status of
the host-extended heavy-current relay.
5） DIGITAL I/O——I/O（ Digital signal input/
output）indicator
Support 4/8-way I/O (digital signal input/output)
indication (subject specific model), when I/O is
triggered by external signal or transmits control
signal to external device, the corresponding
indicator will be constantly on or flashing.
6） RESET——Reset key
If illegal user application (e.g. closed loop) has
been downloaded in the host, the host could be in
abnormal status, please press RESET to clear up
user application.
Specific operation manner: turn off host power,
and press RESET key to charge the host (Do not
release RESET key), then the host will be making
di-di sound. When the sound lasts for 7 to 8 times,
release the key, then the illegal user application
will be fully cleared up from the host. The host will
resume normal.
7） SENSOR——Infrared receiving window
SPRO Network Control Host Series all provide
built-in infrared learner. SENSOR is for receiving
signal in infrared learning.
8） MIC—— MIC port
SPRO-CAV801/802 provides two MIC ports,
supporting capacitance and dynamic microphone
connection.
9 ） SLOT1~SLOT4—— Expansion car
indicator
Front panel of the expansion card and 4 rows
of indicator pillars on the expansion card.