CREATOR Single Core Optical Fiber Transmitter - Manual (Page 9)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
Single Core Optical Fiber Transmitter User's Manual 4
 Support transmission of Audio signal, IR
signal and RS-232 signal;
 Support the field refresh EDID;
 Transmission distance is up to 300M.
2.2.2 Panel Description
CR-uSF HD 200T front panel:
CR-uSF HD 200T rear panel:
1 HDMI——HDMI audio and video input
interface
Support one-way HDMI audio and video signal
input, using HDMI-A interface, used in PC and
other peripheral equipments.
2 DVI——DVI video input interface
Support one-way DVI video signal input, using
DVI-D interface, used in PC and other peripheral
equipments.
3 AUDIO——Audio input interface
Support 1 3.5mm unbalanced stereo audio input.
4 RS-232——Serial through interfaces
5 IR TX——Infrared transmitting interface
Connect the infrared transmitter to transmit the
infrared signal from optical fiber transmission.
6 IR RX——Infrared receiving interface
Connected with the infrared receiver to
receive infrared signal from remote control
etc..
7 INPUTS——Video input indicator
8 OUTPUTS——fiber connection indicator
9 DC 12V——Power and lights
CR-uSF HD 200T power supply and the power
indicator light, the indicator lights up when
controller is powered normally.
10 FIBER——Optical fiber output interface
One way fiber signal output, is used for optical
signal transmission.
11 MONITOR——Video monitoring output
interface
12 CHANNEL——Channel selection button
Press this button to switch different signal inputs.
13 EDID——EDID read and write key
Press the key to read and write EDID, used for
copy EDID of local connected display device.