CREATOR Single Core Optical Fiber Transmitter - Manual (Page 16)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
Single Core Optical Fiber Transmitter User's Manual 11
Specifications
Model
CR-uSF AV 200T
Common mode
rejection ratio(CMRR)
>75dB @; 20 Hz ~ 20 kHz
Signal Type Stereo (Unbalanced connection)
Impedance
Input:>10 kΩ(balanced or unbalanced connection)
Output:50Ω ( unbalanced connection)
Maximum input level +19.5dBu, (balanced or unbalanced connection)
Gain error ±0.1dB @20 Hz ~ 20 kHz
IR INFRARED
Interface
Input: 3.5mm unbalanced vertical stereo audio socket
Output:3.5mm unbalanced vertical stereo audio socket
Signal Type
Input; digital
Output; digital
Output level type PLL level
Wavelength 850nm
The carrier frequency
of input level 38KHz
RS-232
Interface
RS-232, 3.5mm unbalanced vertical stereo audio socket
Signal Type Digital
Level type RS-232 level
Signal direction Bi-direction communication
Baud rate Min;4800bps Max;115200bps
Data bits 8
Stop bit 1
Correction bits None
Flow control None
Level delay 500 ns
Peak +/-15V
Output
Fiber output interface
SC connector
Fiber type Multimode / Single Mode(Optional)
Wavelength Multimode 850nm / Single Mode; 1310 –1620nm(Optional)
Interface bandwidth Positive; 6.25Gbps, reverse:3.125Gbps
Clock Jitter <0.15T bit
Rise time <0.3Tbit (20%--80%)
Fall time <0.3Tbit (20%--80%)
The recommended
maximum input
distance
OM3 multimode fiber; less than 300 meters, when the resolution is
1920x1080p@60
Other specifications
Power supply
Power adaptor,12VDC/2A