CREATOR Single Core Optical Fiber Transmitter - Manual (Page 10)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
Single Core Optical Fiber Transmitter User's Manual 5
2.2.3 Connection Diagram
2.3 CR-uSF DVI 200R Receiver
CR-uSF DVI 200R is a single core multimode
fiber transmission receiver supporting
high
resolution DVI signal. It can restore the received
optical signal to the HD DVI signal and audio
signal, and can be used with CR-uSF HD 200T or
fiber matrix; supports for RS-232 and IR passing
through.
2.3.1 Function Characteristics
 support single core multi-mode fiber
transmission of high resolution of DVI signal;
 Support transmission of Audio signal, IR
signal and RS-232 signal;
 Transmission distance is up to 300M.
2.3.2 Panel Description
CR-uSF DVI 200R front panel:
CR-uSF DVI 200R rear panel:
1 DC 12V——Power and lights
CR-uSF DVI 200R power supply and the power
indicator light, the indicator lights up when
controller is powered normally.
2 FIBER——Optical fiber input interface
One way fiber signal input, is used for optical
signal transmission.
3 NPUTS——Fiber connection indicator
4 IR RX——Infrared receiving interface
Connected with the infrared receiver, receiving
infrared signals of remote control etc.
5 IR TX——infrared transmission interface
Connect the infrared transmitter, transmitting
infrared signal from optical fiber transmission.
6 RS-232——Serial through interfaces
7 AUDIO——Audio input interface
Support one way 3.5mm unbalanced stereo audio
input.