CREATOR Single Core Optical Fiber Transmitter - Manual (Page 15)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
Single Core Optical Fiber Transmitter User's Manual 10
Specifications
Model
CR-uSF AV 200T
Minimum / maximum
level
T.M.D.S. 2.9V/3.3V
Input impedance 50 Ω
Input EDID Using the default EDID, (support terminal EDID mapping to input)
Maximum DC offset
error
+/-15mV
The recommended
maximum input
distance
Less than 10 meters, when the resolution is 1920x1080p@60
(recommended the use of certified HDMI special wire, as MoIex TM wire)
HDMI video input
Supported protocols
DVI1.0,HDMI1.3a,HDCP1.3
PIXEL bandwidth The pixel bandwidth 165MHz , full digital
Interface bandwidth 2.25Gbps, full digital ( a total of 6.75Gbps. each color is 2.25Gbps )
Maximum support
resolution
PC 1920x1200@60_24bit Color depth
HDTV 1920x1080P@60_36bit Color depth
Clock Jitter <0.15 Tbit
Rise time <0.3Tbit (20%--80%)
Fall time <0.3Tbit (20%--80%)
Signal Type DVI-D/ HDMI full digital T.M.D.S. signal in DVI 1.0 / HDMI 1.3a
specification
Interface HDMI-A Interface (Type A connector )
Signal Strength T.M.D.S. 3.3V p-p
Minimum / maximum
level
T.M.D.S. 2.9V/3.3V
Impedance 50 Ω
Input EDID Using the default EDID, (support terminal EDID mapping to input)
Maximum DC offset
error
+/-15mV
The recommended
maximum input
distance
Less than 10 meters, when the resolution is 1920x1080p@60
(recommended the use of certified HDMI special wire, as MoIex TM wire)
Sound signal
Input/output Interface
3.5mm unbalanced stereo audio input
Gain 0 dB
Frequency response 20 Hz ~ 20 kHz,
Total harmonic
distortion + noise
0.01% @ 1 kHz (Under rated voltage)
The signal-to-noise
ratio (S/N )
>80dB at Vin=0 V
Stereo separation >80dB @ 1 kHz