CREATOR Single Core Optical Fiber Transmitter - Manual (Page 18)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
Single Core Optical Fiber Transmitter User's Manual 13
Specifications
Model
CR-uSF HD 200T
Clock Jitter <0.15T bit
Rise time <0.3Tbit (20%--80%)
Fall time <0.3Tbit (20%--80%)
Signal Type DVI-D/ HDMI full digital T.M.D.S. signal in DVI 1.0 / HDMI 1.3a
specification
Interface HDMI-A Interface
Signal Strength T.M.D.S. 3.3V p-p
Minimum / maximum
level
T.M.D.S. 2.9V/3.3V
Impedance 50 Ω
Input EDID Using the default EDID, (support terminal EDID mapping to input)
Maximum DC offset
error
+/-15mV
The recommended
maximum input
distance
Less than 10 meters, when the resolution is 1920x1080p@60
(recommended the use of certified HDMI special wire, as MoIex TM wire)
Sound signal
Input / output interface
3.5mm unbalanced stereo audio input
Gain 0 dB
Frequency response 20 Hz ~ 20 kHz,
Total harmonic
distortion + noise
0.01% @ 1 kHz (Under rated voltage)
The signal-to-noise
ratio (S/N )
>80dB at Vin=0 V
Stereo separation >80dB @ 1 kHz
Common mode
rejection ratio(CMRR)
>75dB @; 20 Hz ~ 20 kHz
Signal Type Stereo (Unbalanced connection)
Impedance
Input:>10 kΩ(Balanced or unbalanced connection)
Output:50Ω ( unbalanced connection)
Maximum input level +19.5dBu, (Balanced or unbalanced connection)
Gain error ±0.1dB @20 Hz ~ 20 kHz
IR INFRARED
Interface
Input: 3.5mm unbalanced vertical stereo audio socket / Output:3.5mm
unbalanced vertical stereo audio socket
Signal Type Input; digital Output:digital
Output level type PLL level
Wavelength 850nm
The carrier frequency
of input level 38KHz
RS-232