CREATOR Single Core Optical Fiber Transmitter - Manual (Page 14)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
Single Core Optical Fiber Transmitter User's Manual 9
Chapter 3 Technical Parameters
3.1 CR-uSF AV 200T Parameters
Specifications
Model
CR-uSF AV 200T
Analog video input
Interface
HD-15 Interface
Signal Type
Composite
video CV
Y/C video
Component
videoYPbPr
VGA video
Gain 0dB 0dB 0 dB 0 dB
Bandwidth
150MHz @
-3dB
150MHz @ -3dB
350MHz @ -3dB 380 MHz
Differential phase
error
0.1°,3.58-4.43
MHz
0.1°,3.58-4.43
MHz
0.1°,3.58-4.43
MHz
Differential gain error
0.1% ,
3.58-4.43 MHz
0.1% , 3.58-4.43
MHz
0.1% , 3.58-4.43
MHz
Signal Strength
1V p-p ;
Composite
video (CVBS)
1V p-p: S
VIDEO(Y/C)
1V p-p ;( Y in
component
video)
0.3Vp-p;
(PbPr/CbCr in
component
video)
0.63V p-p to 0.9 V
p-p
Minimum / maximum
level
Analog
signal ;
-2V/+2V
Analog signal ;
-2V/+2V
Analog signal ;
-2V/+2V
RGB
signal;0V/1.0V
HV signal:0V/5.0V
Input impedance 75 Ω 75 Ω 75Ω 75Ω
Echo Loss <-30dB@5MH
z
<-30dB@5MHz <-30dB@5MHz <-30dB@5MHz
DVI video input
Supported protocols
DVI1.0,HDMI1.3a,HDCP1.3
PIXEL Bandwidth PlXEL 165MHz , full digital
Interface bandwidth 2.25Gbps,full digital( a total of 6.75Gbps. each color is 2.25Gbps )
Maximum support
resolution
PC 1920x1200@60_24bit Color depth
HDTV 1920x1080P@60_36bit Color depth
Clock Jitter <0.15 T bit
Rise time <0.3Tbit (20%--80%)
Fall time <0.3Tbit (20%--80%)
Signal Type DVI-D/ HDMI full digital T.M.D.S. signal in DVI 1.0 / HDMI 1.3a specification
Interface DVI-D Interface
Signal Strength T.M.D.S. 3.3V p-p