CREATOR Single Core Optical Fiber Transmitter - Manual (Page 22)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
Single Core Optical Fiber Transmitter User's Manual 17
Specifications
Model
CR-uSF HDMI 200R
PIXEL bandwidth The pixel bandwidth 165MHz , full digital
Interface bandwidth 2.25Gbps, full digital ( a total of 6.75Gbps. each color is 2.25Gbps )
Maximum support
resolution
PC 1920x1200@60_24bit Color depth
HDTV 1920x1080P@60_36bit Color depth
Clock Jitter <0.15Tbit
Rise time <0.3Tbit (20%--80%)
Fall time <0.3Tbit (20%--80%)
Signal Type DVI-D/ HDMI full digital T.M.D.S. signal in DVI 1.0 / HDMI 1.3a
specification
Interface HDMI-A Interface
Signal Strength T.M.D.S. 3.3V p-p
Minimum / maximum
level
T.M.D.S. 2.9V/3.3V
Impedance 50 Ω
Maximum DC offset error +/-15mV
The
recommended
maximum output
distance
Less than 10 meters, when the resolution is 1920x1080p@60
(recommended the use of certified HDMI special wire, as MoIex TM wire)
IR INFRARED
Interface
Input: 3.5mm unbalanced vertical stereo audio socket
Output:3.5mm unbalanced vertical stereo audio socket
Signal Type
Input; digital
Output:digital
Output level type PLL level
Wavelength 850nm
The carrier frequency of
input level 38KHz
RS-232
Interface
RS-232, 3.5mm unbalanced vertical stereo audio socket
Signal Type Digital
Level type RS-232 level
Signal direction Bi-direction communication
Baud rate
Min;4800bps
Max;115200bps
Data bits 8
Stop bit 1
Correction bits None
Flow control None
Level delay 500 ns
Peak +/-15V
Input