beautypg.com

Troubleshooting guide – Dakota Digital MCL-3212 User Manual

Page 6

background image

MAN# 650378

Troubleshooting guide


Problem

Possible cause

Solution

Gauge will not light up.

Red/Orange wire does not have power.

Inspect and repair stock harness.

Black/Green wire is not getting a good ground.

Inspect and repair stock harness.

CAN bus wiring open or short.

Inspect and repair stock harness.

Ignition switch not connected or damaged.

Inspect and repair stock switch or harness.

Gauge is damaged.

Return gauge for repair (see instructions).

Gauge lights up, but speed

No data from ECM.

Check engine trouble codes.

will only show zero.

Sensor is not sending a speed signal.

Check wiring and test sensor.

Speed reading is incorrect.

Gauge is not calibrated correctly.

Gauge must be calibrated (see instructions).

Gauge lights up, but tach

No data from ECM.

Check engine trouble codes.

will only show zero.

Gauge will not dim.

Auto dimming is disabled.

Check setting under “night” menu.

Gauge remains dim at all

Light sensor is covered.

Make sure the bottom center of the gauge lens is clean and

times.

not obstructed.

Temperature reading does

‘Run’ switch is not on.

‘Run’ switch must be on to get temperature data from ECM.

not show up.

Sender wire is loose or broken.

Check all wire connections and inspect wire for breaks.

Aftermarket ECM does not support transmitting

Contact ECM manufacturer.

the head temperature data.

Low Fuel Light not turning

Incorrect setting or turned off.

Verify function is “ON” in FUEL setup menu and that the set

on.

up is correct or adjust value. _________________________

Low Fuel Light turning

Incorrect setting.

Verify setting or adjust the value following FUEL menu adjust

on too early/late.

feature in setup.

_________

Low Fuel Light always on.

Sensor damaged. ___________

Check resistances following procedure in service manual.____

Low Fuel Light flashing.

Wiring short or open.

Check gauge and fuel sender connections.

SERVICE AND REPAIR

DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical consultation is available to help you work through any questions or

problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems.
Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization
number.
Package the product in a good quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure to include the RMA number
on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number where you
can be reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase. Send no money. We will bill you after
repair.

Dakota Digital 24 Month Warranty

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or

workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital’s option.

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product. This Warranty does not

apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident.

This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any implied warranty of merchantability, shall be limited to

the duration of this written warranty. Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24
months from date of original purchase. No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the
sale of this product.