CREATOR CR-iMAX901HD - Manual (Page 16)

CREATOR CHINA 2014-07 WWW.CREATOR1997.COM
11 CR-iMAX901HD Multiple Signals Scaler User’s Manual
Image adjustment commands
Command Response Description
Auto Adjust* >VGA Input Auto Adjust VGA Image auto adjust
VStart+* >VGA Input V Start + 1 Move the VGA input image one column up
VStart-* >VGA Input V Start - 1 Move the VGA input image one column down
HStart+* >VGA Input H Start + 1 Move the VGA input image one column left
HStart-* >VGA Input H Start - 1 Move the VGA input image one column right
HTotal+* >VGA Input H Total + 1 Add 1 column to the total of VGA input images
HTotal-* >VGA Input H Total - 1 Remove 1 column of the total of VGA input images
Brightness 000* >Brightness Value: 000 Set Brightness
Brightness* >Brightness Value: 000 Read Brightness
Contrast 000* >Contrast Value: 000 Set Contrast
Contrast* >Contrast Value: 000 Read Contrast
Other commands
Command Response Description
>DEFAULT OK Restore factory defaults in next charge
>COPY EDID OK
Copy EDID display device to HDMI
interface
>SIPR:192.168.1.190 Set the IP address
>GAR:192.168.1.1 Set the gateway address
>SUBR:255.255.255.0 Set the subnet source address
>SPORT:6666 Set the port number
>SIPR:192.168.1.190 Query the IP address
>GAR:192.168.1.1 Query the gateway address
>SUBR:255.255.255.0 Query the subnet mask
>SPORT:6666 Query the port number
>Bell On Open the buzzer
>Bell Off Close the buzzer
>Bell Status: ON Query buzzer status
>LPMCU SW Versions: V1.0
>FPMCU SW Versions: V1.0
>FLMCU SW Versions: V1.0
Check the software version