CREATOR WiFi Conference System - Manual (Page 14)

CREATOR CHINA 2013-09 WWW.CREATOR1997.COM
8 WiFi Conference System User‘s Manual
3 SIG Control signal
4 GND Signal ground
AUDIO interface pin function of wireless
AP access device is same with this
description.
Connection wire between this interface and
the wireless AP access device should be the
audio wire with shielding layer, so as to
effectively guarantee the audio transmission
quality.
2.8 CR-WiFi6201 Controller
Installation
WiFi conference system controller can be
mounted in a standard 19 inch rack, the standard
controller accessories contain a pair of cabinet
mounting brackets , see below:
2.9 CR-WiFi6201 Technical
Parameters
Network interface RJ45 port
Control interface DB9 female port
Display 1602LCD displayer
Signal to noise
ratio(S/N)
>80dB
Harmonic
distortion
<0.5%
Carrier distortion <1%
Crosstalk
attenuation(1KHz)
>50dB
Static power
consumption
3W
Maximum power
dissipation
70W
Dynamic range >80dB
Frequency
response
20Hz~20KHz
communication
distance between
AP and controllert
<100m
Dimension 483LX290WX43.6H(mm)
Power supply
(America, Japan)
AC100V~AC120V 60Hz
Power supply
(Eurasia)
AC200V~AC240V 50Hz