CREATOR Digital Conference System - Manual (Page 14)

CREATOR CHINA 2010-09 WWW.CREATOR1997.COM
5 User
’s Manual of Intelligent Digital Conference System
multiple extended controllers.
14） DELEGATES —— Connect to Discussion
unit。
15） CONTROL SYSTEM ——connect to
controller of central controlling system or camera
tracing controller, realize auto-camera and tracing
function.
16） PC
——Connect to PC serial port, realize
conference management function via software.
17） SET ID
——ID setup of Conference unit
18） POWER INPUT ——Power input, support
AC110V/220V
2.1.2 Functions and Features
◆ Conference controlling controller can connect
up to 128 conference units, via conference
extended controller, a set of conference system
can connect to 4096 conference units at
maximum.
◆ Connect to 36 interpreter units at maximum,
realizing the function of 11+1 languages
simultaneous interpretation;
◆ Adopt special 8-pin aviation plug；
◆ Hand-in-hand or T-shaped connection mode；
◆ With audio input port；
◆ With multiple original audio channels output；
◆ Number of speakers limitation; Adjustable
number of 1/2/4/6 for speaking units. Chairman
unit is not limited.
◆ Support a variety of conference modes of FIFO,
NORMAL, FREE and APPLY.
◆ Support auto-camera tracing function；
◆ Hold remote telephone conference along with
telephone coupler；
◆ Support sign-up, voting and data management
function；
◆ The controller can be installed into a standard
19-inch cabinet.
2.1.3 Port Pin Instruction
2.1.3.1 Pin instruction to CONTROL SYSTEM
COM
Pin Signal Instruction
1 — —
2 — —
3 TXD Data transmission
4
— —
5 GND Signal ground
6
— —
7 — —
8 — —
9 — —
2.1.3.2 PC COM pin instruction
Pin Signal Instruction
1 — —
2 TXD Data transmission
3 RXD Data receiving
4
— —
5 GND Signal ground
6 — —