Comtech EF Data CMR-5975 Manual - Manual (Page 88)

Digicast Media Router S2 Receiver CMR-5975 (MR-S2) Revision 3
Software Upgrade MN-CMR5975-IOM
A–2
IMPORTANT
A.2 Web Interface
Access the Administrative Configuration menu (Figure A-1):
a) In the Update Firmware section, enter the Unit TFTP Server IP Address .
b) Select Application or FPGA for the Image Type to be upgraded.
c) Enter a valid username and password in the Login Required section (below
the Update Firmware section) then select Update . The software update will
begin to download.
Do
NOT power the unit down during the upgrade process.
d) When the update is complete, the message “ Press any key to continue ”
will be displayed.
e) Once the unit is upgraded, reset the unit by entering a valid username and
password in the first
Login Required section, then selecting Reset Unit .