Comtech EF Data SFC4200 - Manual (Page 65)

SFC4200/SFC1275G Synthesized Frequency Downconverter Technical Specifications
TM054 - Rev. 4.0 7-3
7.8 Operator Interface
Remote M&C Interface: Operator Serial Port Configurable to RS-232, RS-422, or
RS-485
Remote Features: Frequency, Gain, and Channel Control
Status Reports
Signal Strength Monitoring
Fault Isolation
Reference Offset Control
Front Panel Controls & Indicators : LCD Menu Driven Display provides indication & control
of Frequency, Channel, Gain, Rx Signal Strength,
Status, and Switch Status
Rear panel Connections:
Operator Serial Port D Sub 9 Pin
10 MHz REF In (BNC),
REF Out (BNC)
Fault/Test D Sub 9 Pin
Switch Interface D Sub15 Pin
Equipment RS-485 Interface D Sub 9 Pin
IEC 320/C13 Power Entry Module
Module Switch, #10 Ground Lug
Front Panel Test Ports: LO Monitor -15 dBm SMA-F
RF Monitor -15 dB SMA-F
IF Monitor -15 dB SMA-F
7.9 Environmental Characteristics
Temperature: 0 to 50
°
C
Humidity: To 95% Non-Condensing
Altitude: To 8,000 Feet AMSL
Shock & Vibration: No loss of frame synchronization at the BER Test Set
due to a standard hammer drop test on any outside
surface of the converter. Likewise, no loss of frame
synchronization for temperature gradients of
±
22
°
C/Hr.
Storage Temperature: -32 to +65
°
C
Note: These specifications are subject to change.