Comtech EF Data SFC4200 User Manual

Page 11

SFC4200/SFC1275G Synthesized Frequency Downconverter

Table of Contents

TM054 - Rev. 4.0

4.5.7 Clear Faults Command (All) ______________________________________4-22

4.5.8 Auto Mode Command (P1:1, B1:1, B1:8) ____________________________4-22

4.5.9 Manual Mode Command (P1:1, B1:1)_______________________________4-23

4.5.10 Manual Backup Command (B1:8)_________________________________4-23

4.5.11 Set Stored Gain For a Specified Channel (S, P1:1, P1:8) ______________4-23

4.5.12 Set Stored Frequency For a Specified Channel (S, P1:1, P1:8)__________4-23

4.5.13 Erase (All) ___________________________________________________4-23

4.5.14 Restart (All)__________________________________________________4-24

4.5.15 Data (All)____________________________________________________4-24

4.5.16 Learn (B1:1, B1:8) ____________________________________________4-24

4.5.17 Show Priority (B1:8) ___________________________________________4-24

4.5.18 Set Priority (B1:8) _____________________________________________4-24

4.6 SFC Downconverter Operator Quick Reference Guide ___________________4-25

Section 5 – Electrical Interfaces

5.0 SFC Downconverter Connections ____________________________________5-1

5.1 Power _________________________________________________________5-1

5.2 RF In (J1)_______________________________________________________5-1

5.3 IF Out (J2) ______________________________________________________5-1

5.4 10 MHz Ref Out (J3) ______________________________________________5-1

5.5 10 MHz Ref In (J4)________________________________________________5-1

5.6 B. U. Switch Interface (J5) __________________________________________5-1

5.7 Equipment RS-485 (J6) ____________________________________________5-2

5.8 Test/Fault (J7) ___________________________________________________5-3

5.9 Operation Serial I/O (J8) ___________________________________________5-4

5.10 Coarse VCXO Adjustment _________________________________________5-7

5.11 Monitor Ports ___________________________________________________5-8

5.11.1 RF Monitor Port _______________________________________________5-8

5.11.2 IF Monitor Port ________________________________________________5-8

5.11.3 LO Monitor ___________________________________________________5-8

This manual is related to the following products: