Comtech EF Data SFC4200 User Manual
Page 29
SFC4200/SFC1275G Synthesized Frequency Downconverter
User Interfaces
TM054 - Rev. 4.0
4-5
Utility Menu:
Allows the operator to access the various utility
submenus described below:
Learn Menu (Backup Converter Only):
Allows the operator to tell the Backup Converter
to ‘Learn’ about the Primary Converter.
Learn Status Menu (Backup Converter Only): Informs the operator of the status of the learning
process; successful or failed. If failed,
additional submenus inform the operator why.
Unit Configuration Menu:
Allows operator selection of unit address (1 -
99), serial port baud rate (1200, 2400, 4800, and
9600 baud), Echo On/Off, specifies converter
configuration (Single, 1:1 or 1:8) and indicates
backup/primary configuration.
Reference Menu:
This menu allows the operator to adjust the
reference source in PPB and to view the
number of hours the converter has been in
operation.
Output Attenuator Calibration Menu:
The calibration menu allows a qualified operator
to calibrate the 20 dB output attenuator.
Note: Access to the Service Menu and the Calibration menus is denied when the
converter is online, as these submenus allow direct access to the synthesizer tuning.