Comtech EF Data EQ90 Series - Manual (Page 55)

Maintenance EQ90 Amplitude Equalizer
4–4 Rev. 2
4.3.4 Fuse Replacement
Replace fuse in the power supply rear panel AC power receptacle, proceed as follows:
1. Remove power cord from primary power receptacle.
2. Using small screwdriver, pry locking tab of fuse holder to release fuse holder
from rear panel power receptacle and remove fuse holder from receptacle.
3. Remove fuse from fuse holder and install replacement fuse in fuse holder.
4. Insert fuses holder into power receptacle and press inward until fuse holder
locking tab snaps into place.
4.3.5 Spare Parts
Figure 4-1 illustrates the location of the equalizer module and components and Table 4-2
lists the spare parts for the equalizer.