Comtech EF Data EQ90 Series - Manual (Page 28)

Operation EQ90 Amplitude Equalizer
3-4 Rev. 2
Table Chapter 3-2. Rear Panel Controls and Connector Functions
Item Nomenclature Function
1 AC Power Receptacle AC voltage input assembly, which
provides AC input power filtering for
channel “B” power supply.
2 On/Off Switch Applies primary AC input voltage to the
internal power supply.
3 Fuse Receptacle Contains two 2A fuses to protect the
equalizer from excessive current draw.
4 CHAN B Monitor
Connector 9-pin, D-type female connector provides
summary alarm to an annunciator device,
summary alarm panel, or redundancy
switching equipment.
5 B OUT Connector BNC type, female connector that routes
the IF signal output from the equalizer to
external equipment.
6 B IN Connector BNC type, female connector that routes
the IF signal input from external
equipment to the equalizer.
7 A OUT Connector BNC type, female connector that routes
the IF signal output from the equalizer to
external equipment.
8 A IN Connector BNC type, female connector that routes
the IF signal input from external
equipment to the equalizer.
9 Fuse Receptacle Contains two 2A fuses to protect the
equalizer from excessive current draw.
10 On/Off Switch Applies primary AC input voltage to the
internal power supply.
11 AC Power Receptacle AC voltage input assembly that provides
AC input power filtering for the channel
“A” power supply.
12 Connector E1 Provides equalizer ground connection to
cabinet or earth station ground system.
13 CHAN A MONITOR
Connector 9-pin, D-type female connector provides
summary alarm to an annunciator device,
summary alarm panel, or redundancy
switching equipment.