Refrigerator kit – CompX eLock Latch Upgrade User Manual
Page 9
Refrigerator Kit
9
CompX eLock • compx.com
864.297.6655
compxelock.com
[email protected]
PO Box 200
Mauldin, SC 29662
Copyright 2009 © CompX Security Products.
CompX eLock and Lockview are Registered Trademarks of CompX International
Step 21 – SecuRe the StRike and attach the
StRike coveR (if StRike waS mounted uSing
foam tape, Skip to the Second bullet below.)
k
Screw one tamper resistant sheet metal screw into the center
of the strike’s slotted area. Note: The end of the metal strike
needs to curve up.
k
Place the plastic strike cover over the metal strike. If strike was
mounted using foam tape, please proceed to Step 3.
k
Attach with one tamper resistant machine screw.
Step 22 – veRify opeRation
Enter a valid pin code, or swipe a valid magstripe or HID prox card.