Refrigerator kit – CompX eLock Latch Upgrade User Manual
Page 5
Refrigerator Kit
5
CompX eLock • compx.com
Step 10
Turn refrigerator lock housing and main access unit assembly over. Line
up screw holes in housing with holes in main access control assembly.
Step 11
Install using two (2) short silver screws and #2 Phillips screwdriver.
Step 12 – making connectionS
Install the cable end of the RJ11 connector/cable assembly into main
access control unit. YoU mUST HeAR IT CLICK. Place RJ11 connector/
cable assembly into opening in refrigerator lock housing as shown. It is
ABSoLUTeLY critical that the snap feature on the connector is located
on the opposite side of the battery holder, or the cover will not properly fit.