Refrigerator kit – CompX eLock Latch Upgrade User Manual
Page 2
Refrigerator Kit
2
CompX eLock • compx.com
Step 1
Remove the existing refrigerator lock and strike from the refrigerator
that it is installed upon.
Step 2
Remove four back cover screws with #2 Phillips screwdriver. Remove
cover and discard.
Step 3 – Removing the latch
Disconnect the latch cable and remove the latch by removing four (4)
latch screws with a #2 Phillips screwdriver. Discard latch and screws.
3A – Disconnect latch cable.
3B – Remove latch screws (4).
3C – Discard latch and latch screws.