CompX eLock Latch Upgrade - Manual (Page 6)

Refrigerator Kit
6
CompX eLock • compx.com
Step 13
Snap connector into housing.
Step 14 – inStall new latch
Gather the new latch, the long silver screws and the washers. Install
the washers on the screws as shown.
Step 15
Place the latch on the housing as shown. The orientation of the latch
is critical, “Patent Pending” on the latch must be visible and the latch
bolt must point to the outside of the main refrigerator lock housing and
the beveled part of the latch bolt is visible. Line up the mount holes
in the latch with the screw bosses in the housing, insert the screws/
washers and turn them ½ twist by hand.