Refrigerator kit – CompX eLock Latch Upgrade User Manual
Page 3
Refrigerator Kit
3
CompX eLock • compx.com
4C – Using large slotted screwdriver, deflect housing wall to allow to
battery box to be removed.
Step 5 – Removing the bezel
(do noT dAmAge)
Remove main access assembly by removing two (2) screws with #2
Phillips screwdriver.
Step 4 – Removing the batteRy box
(do noT dAmAge)
Disconnect battery cable and RJ11 cable from main access control
unit. mAKe SURe to depress connector locks before removing cables,
or permanent damage will result.
4A – Illustration of connector locks.
4B – Depress connector locks and remove battery cable and RJ11 cable.