Setting the serial interface, Disconnection on fault, Word length – Compuprint 9060LA User Manual
Page 99
95
Setting the Serial Interface
Disconnection on Fault
The
DISCON. ON FAULT
Option defines the DTR line behavior for any fault condition detected
by the printer.
Value
Definition
No discon.
The DTR line does not change.
Yes (DTR drop)
The DTR line is dropped to low signal level.
Yes (DTR pulse)
The DTR line is pulsed to high signal level with a 5 sec pulse.
Word Length
The
WORD LENGTH
Option allows you to determine the data format.
Value
Definition
8 bit
The data are coded using 8 bit.
7 bit
The data are coded using 7 bit.
This manual is related to the following products: