Left margin, Form width, Top margin – Compuprint 9060LA User Manual
Page 108
104
The
TOP MARGIN
and
BOTTOM MARGIN
Options do not depend on the
VERTICAL PITCH
Option
when you define the form length using the
NUMBER OF LINES
Sub-option.
Left Margin
The
LEFT MARGIN
Option is defined by the number of the columns (numbered from the left
paper edge) where the printing actually starts. The values range between Column #1 and
Column #272.
Form Width
The
FORM WIDTH
Option lets you set the correct page width in inches. The available values are
8, 13.2 and 13.6 inches. The Factory setting of the Value is
13.6 inches
.
The current value of the
LEFT MARGIN
Option is set to
Column #1
each time you change the
value of the
HORIZONTAL PITCH
Option. This new setting applies only for the corresponding
protocol.
Top Margin
The
TOP MARGIN
Option lets you set the top margin with the number of the line (numbered from
the top paper edge) where the printing actually starts.
The setting of this Option depends on the setting of both the
VERTICAL PITCH
and the
FORM
LENGTH
Options (see the corresponding related sections in this chapter).
The Values range from
Line #1
to the Value corresponding to the
BOTTOM MARGIN
setting.
Line #1
is the Factory setting of the Value.