D-Link DES-5200 - Manual (Page 99)

Fast Ethernet Switching System User’s Guide
Web Management
92
Follow these steps to select a menu:
1. Click on the folder icon to select it.
2. Click on the menu to select it.
System Information
The System Information menu displays the Hardware Revision, MAC address,
LAN IP address and other information on the DES-5200.
System Reset
The System Reset panel enables you to reset the DES-5200 through software
rather than powering off.
Factory Reset to Default Config Values
Enables you to reload factory default configurations.
System Rate Control
Enables you to choose Store & Forward or Cut-Through. The advantages and
disadvantages of each are explained in a later section.
Software Update
Software can be updated in two ways: XMODEM and TFTP. XMODEM requires
a physical connection between the DES-5200 and a workstation. TFTP can be
done remotely. When updating software over the web, TFTP is the only option
that can be used. Refer to Chapter 5, Software Update for information on updating
software through XMODEM.