D-Link DES-5200 - Manual (Page 18)

Fast Ethernet Switching System User’s Guide
Installing the DES-5200
11
Installation Options
There are two options for installing the DES-5200: desktop/ shelf installation or
rack installation.
Follow these guidelines for desktop/ shelf installation or rack installation:
•
The surface must support 8 kg (18 lbs.)
•
The power source must be within 1.82 m (6 feet)
•
The power cord and cables should never be stretched.
•
Leave at least 5.08 cm (2 in.) around the DES-5200 for ventilation
The following tools and materials may be necessary to install the DES-5200:
•
Screwdriver to install the brackets as needed.
•
Wire cutters to cut cable as needed for network connections.
•
Crimpers to crimp cable as needed.
•
RJ-45 connectors as needed.
•
SC fiber optic cable connectors as needed.
Refer to Chapter 3, Cable Specifications for cable types and specifications.