D-Link DES-5200 - Manual (Page 58)

Fast Ethernet Switching System User’s Guide
Managing the DES-5200
51
Software Update Menu
The Software Update menu is used to update the software on the DES-5200.
Software can be updated using either XMODEM or TFTP.
XMODEM requires a direct physical connection between a PC and the DES-
5200.
TFTP requires a TFTP server and that you know the Internet Protocol (IP) address
of the server and the complete path and filename. TFTP can be done over the
network or from a remote location.
Software Update Configuration
XMODEM
There are two options on the menu displayed in Figure 27. XMODEM is the
default option.
Figure 27: Software Update Configuration
Follow these steps to download using XMODEM:
1. Use HyperTerminal with the settings given under Local Console
Management.
2. Verify the download mode is set for XMODEM.
3. Select EXECUTE and press Enter.