D-Link DES-5200 - Manual (Page 10)

Fast Ethernet Switching System User’s Guide
Introduction
3
•
The DES-5200 can be managed through four methods: Console
Management, Telnet Management, SNMP Management and Web
Management.
•
Supports Cut-through and Store-and-Forward switching.
•
Supports Full and Half Duplex for both 10 Mbps and 100 Mbps.
•
Supports Spanning Tree Protocol to eliminate network loops.
•
Eight thousand active MAC address table entries per device with
self-learning and table aging.
•
The DES-5200 supports SNMP for RFC 1213, RFC 1757, and
RFC 1493.
•
VLAN support for eight broadcast domains.
•
Port Trunking support for bandwidth aggregation between two
DES-5200 switches.
•
The 1000BASE-SX port supports flow control compliant with
IEEE 802.3x standard.
•
Modular chassis that support RJ-45, fiber optic and gigabit
expansion modules
•
Support for RMON statistics through SNMP software.