Ready Remote 24927 - Manual (Page 70)

67 © 2 0 0 6 D i r e c t e d E l e c t r o n i c s
Auto-rearming feature
Auto-rearming is designed to protect the vehicle in case of unin-
tended disarming of the alarm.
It will automatically re-arm the alarm and lock the doors 120
seconds after any transmitter disarm occurs.
To stop Auto-rearm simply open a door or turn the ignition on
before the 120 seconds expires.
Alarm Input Operations
When armed the alarm has 6 inputs that will cause a full alarm
trigger output. Refer to the Alarm Diagnostic section for addi-
tional detail.
➤
The Door, Hood, Ignition and Brake inputs will cause an
immediate full trigger output when activated.
➤
The Sensor inputs can cause two types of outputs; Warn-
away and Full Trigger.
Alarm Trigger Outputs
➤
Warn-away output: this output consists of 5 chirps of
the Horn/Siren output and 3 flashes of the parking
lights.
➤
Full Trigger output: this output consists of flashing the
Parking lights and the Horn/Siren output for 30 seconds
followed by a 5 second pause to monitor the alarm
inputs. If an alarm input is still active the output will
repeat.
note! An optional two stage sensor is required for
the Sensor outputs to activate. Call Technical
Support for more information on compatible sensors.