Ready Remote 24927 - Manual (Page 32)

29 © 2 0 0 6 D i r e c t e d E l e c t r o n i c s
output. The output will then remain on until the transmitter
button is released.
Retained Accessory, Dome Light or Starter Kill wire
The Brown wire has three optional uses depending on the vehicle
application and user preference. The three available operations are
programmable in Feature Menu 2/11
➤
RAP or Retained Accessory Power: This option is
designed to turn off accessories that remain on after the
ignition is turned off. It will pulse 10 seconds after the
remote start status output ceases. It will make the vehi-
cle body control module think the door has opened, thus
turning the accessories off.
➤
Dome Light Supervision: This option will turn on the
dome light for 25 second each time the vehicle is
unlocked. It will cease if on when the doors are locked
or the ignition in turned on.
➤
Start Kill/Anti-grind: This option activates when the
doors are locked to allow for starter kill for the alarm
system and also works as an anti-grind when the remote
start is active.
important! this is a low current output and that
requires an external relay when connected to cir-
cuits that draw more than 400mA in current.
important! this is a low current output and that
requires an external relay when connected to cir-
cuits that draw more than 400mA in current.