Ready Remote 24927 - Manual (Page 6)

3 © 2 0 0 6 D i r e c t e d E l e c t r o n i c s
Install Guide
what is included
Control Module
6-Pin Main H1 Harness
8-Pin H2 Secondary Harness
Heavy Gauge Wires
Antenna and cable
Two 5-button remotes
Crash code card
3-pin Keyless Entry harness
Combination Momentary Switch and LED
Hood Pin Switch
Hardware Kit
DVD—Do-It-Yourself Installation Video
Additional parts may be required (such as relays or bypass).
installation tools
Digital Multi-Meter
Drill
1 /
4
Drill Bit (for hood pin switch)
Screwdrivers (Phillips and Flathead)
Wire Stripper
Solder Iron
Electrical Tape
Pliers
Crimping Tool
note: The installation tools listed above may be
optional and those required will vary depending on
your vehicle.