Ready Remote 24927 - Manual (Page 64)

61 © 2 0 0 6 D i r e c t e d E l e c t r o n i c s
When you are ready to drive the vehicle:
➤
Insert the ignition key and turn it to the ON (not the
START) position.
➤
Press the brake pedal, the remote start will shut down
and the engine will continue to run
To shut down remote start:
The remote start can be shut down in several ways for convenience
by the user or for safety by the shut down inputs.
User remote start shut downs:
➤
The transmitter button is pressed twice.
➤
Pulse the activation input wire twice
note! If the brake pedal is pressed before the key is
in the ON position, the engine will shut down.
important! It is unsafe to operate a vehicle's motor
in a garage or other closed off area. Breathing the
exhaust from the vehicle is hazardous to your health.
Never activate the remote start in an enclosed space.
important! Never remote start your vehicle when the
keys are in the ignition, except when activating Quick
Stop Mode, and never start the vehicle if it is not in
PARK and the Parking brake is not set.
note! If the lights flash more than once and the
engine does not start, refer to the No Start
Diagnostics for the cause.